Research progress and hot spots of hydrothermal liquefaction for bio-oil production based on bibliometric analysis

Environmental Science and Pollution Research - Hydrothermal liquefaction (HTL) of biomass used HTL reaction under high temperature and pressure to produce bio-oil. This technology is considered as...     

基于关联性及趋势性分析的AVHRR NDVI及#br# MODIS NDVI数据产品比较

针对AVHRR NDVI和MODIS NDVI数据集中不同数据产品间的差异和区域适应性问题，利用2003~2013年重叠时间段MODIS Terra/Aqua的NDVI Collection 5(C5)和Collection 6(C6)产品以及AVHRR NDVI中的GIMMS NDVI3g产品，选择汉江流域典型区域进行数据对比分析。通过关联指数IOAs(Index of Association)来评价各数据在季节波动上的一致性；采用Mann Kendall检验分析各数据的长期趋势差异。结果表明，在季节性变化上，同一卫星不同版本产品之间的关联性相对较高。在年际变化上，GIMMS产品相对MODIS 产品，仅能检出部分NDVI变化趋势。在地表覆被异质性相对较高地区，GIMMS产品的长期变化趋势检出率较低。MODIS Terra的NDVI C5产品受传感器退化影响，表现出相对较高的减少趋势。 关键词： GIMMS NDVI；MODIS NDVI；Mann Kendall检验；趋势分析     

Mitigating Impact of Devils Lake Flooding on the Sheyenne River Sulfate Concentration

Devils Lake is a terminal lake located in northeast North Dakota. Because of its glacial origin and accumulated salts from evaporation, the lake has a high concentration of sulfate compared to the surrounding water bodies. From 1993 to 2011, Devils Lake water levels rose by ~10 m, which flooded surrounding communities and increased the chance of an overspill to the Sheyenne River. To control the flooding, the State of North Dakota constructed two outlets to pump the lake water to the river. However, the pumped water has raised concerns about of water quality degradation and potential flooding risk of the Sheyenne River. To investigate these perceived impacts, a Soil and Water Assessment Tool (SWAT) model was developed for the Sheyenne River and it was linked to a coupled SWAT and CE‐QUAL‐W2 model that was developed for Devils Lake in a previous study. While the current outlet schedule has attempted to maintain the total river discharge within the confines of a two‐year flood (36 m³/s), our simulation from 2012 to 2018 revealed that the diversion increased the Sheyenne River sulfate concentration from an average of 125 to >750 mg/L. Furthermore, a conceptual optimization model was developed with a goal of better preserving the water quality of the Sheyenne River while effectively mitigating the flooding of Devils Lake. The optimal solution provides a “win–win” outlet management that maintains the efficiency of the outlets while reducing the Sheyenne River sulfate concentration to ≤600 mg/L.     

基于探索性数据分析的汉丰湖富营养化驱动因子研究

为了探究汉丰湖富营养化驱动因子和营养状况，基于2014年水质监测数据，应用探索性数据分析方法初步研究了汉丰湖水动力条件与环境因子的相关性、水质主成分、相关环境因子熵权和营养健康指数。回归分析结果表明：水位与透明度呈正相关，流量与DO呈负相关，与流速呈负相关的因子为Chla、CODMn、NH+4-N和DTP；主成分分析提取的3个主成分分别反映了营养盐、有机污染以及藻类信息；DO、TN和TP的熵权表明汉丰湖水体的富营养状况受制于耗氧有机污染和氮、磷营养盐；营养健康指数S1>S3>S6（湖心）>S7（湖尾）>S5（湖首）>S4>S2。汉丰湖水体营养状况介于中营养到轻富营养，其中南河营养状态较高，湖心营养程度高于湖首和湖尾。减少有机污染物、营养盐的输入和改善局部水域的水动力条件可抑制藻类生长，有利于防治富营养化。 关键词： 探索性数据分析；汉丰湖；富营养化；驱动因子；水动力条件；主成分；熵权；营养健康指数     

16S rDNA克隆文库解析AO-MBR系统中细菌种群多样性

采用分子生物学手段16S rDNA克隆文库方法对缺氧/好氧膜生物反应器(AO-MBR)的好氧池与缺氧池中细菌进行了多样性研究.实验结果表明,好氧池污泥样品的克隆文库包括9个类群,其中变形菌(Proteobacteria)和拟杆菌(Bacteroidetes)在文库中所占比例最大,分别为37.04％和14.81％;其次是酸杆菌(Acidobacteria)、未培养菌(uncultured bacterium)、绿菌(Chlorobi)和未培养的绿弯菌(uncultured Chloroflexi bacterium)、浮霉状菌(Planctomycetes),分别为11.11％、11.11％、7.41％、7.41％和5.56％;硝化螺旋菌(Nitrospirae)和裸藻门(Euglenozoa)所占比例相对较小,均为1.85％.缺氧池样品克隆文库包括10个类群,其中变形菌(Proteobacteria)、拟杆菌(Bacteroidetes)和未培养菌(uncultured bacterium)在文库中所占比例最大,分别为27.91％、13.95％和12.79％;其次是浮霉状菌(Planctomycetes)、酸杆菌(Acidobacteria)和绿弯菌(Chloroflexi),在文库中所占比例分别为9.3％、9.3％和9.3％;硝化螺旋菌(Nitrospirae)、裸藻门(Euglenozoa)、芽单胞菌(Gemmatimonadetes)和放线菌(Actinobacteria)所占比例相对较少,分别为6.98％、8.14％、1.16％和1.16％.两池细菌的主要类群相似,但菌属及比例有所差异,变形菌是系统中的主要脱氮菌属.     

阳春春湾柴草自燃现象与地震活动关系探讨

通过对广东省阳春市春湾镇龙虎坑村柴草自燃现象与地震活动时间序列以及对自燃区地质地貌、断层气测量等研究,认为,自燃现象与强震活动有密切的对应关系;柴草自燃现象是区域构造应力场加强的窗口效应.     

企业安全管理体系标准模式的比较研究

采用对比分析法和实证分析法,对当前国内外流行的企业安全管理体系标准模式及其评价方法进行比较研究,旨在把握诸多标准模式的原则、路径、结构、方法和共性特征及其可以发挥的具体优点,将研究的标准模式的评价方法归纳为两大类即体系认证审核法和综合考评打分法,并对两类评价方法的优缺点进行剖析。体系认证审核法的优点是过程方法、符合性及抽样,考评打分法则提供了安全绩效准则。对吸收融合两类评价方法的优点形成综合性评价方法的途径和方式进行了探讨,为企业建立有效、适用的安全管理体系提供了依据。     

金属加工过程中应力状态的分析方法

分析简单地拉伸、压缩和扭转的情况时,应力状态能容易地被确定.但是,实际上在金属加工过程中材料是承受复杂的应力状态,在模具——工件接触面上增加有摩擦力.而且,这些应力和摩擦力一般地沿着接触面变化.准确的计算或预测载荷、力、应力和温度,不但对设计适宜的设备是重要的,而且对研究工艺期间材料的变化过程也是重要的.本文将讨论材料变形过程中所运用的主要分析方法及其优缺点.     

Thermal conversion of rice husks and sawdust to liquid fuel

The paper focuses on studying the conversion of rice husks and sawdust into liquid fuel. Rice husks, sawdust and their mixture are pyrolyzed at temperatures between 420 and 540 degrees C, and the main product of liquid fuel is obtained. The experimental result shows that the yield of liquid fuel depends on various factors such as feedstock and temperature. The maximum yields for rice husks, sawdust and their mixture are 56%, 61% and 60% at 465, 490 and 475 degrees C, respectively. Analyses with GC-MS and other apparatus show that the liquid fuel is a complicated compound with low caloric value and can be directly used as a fuel oil for combustion in a boiler or a furnace without any upgrading. Alternatively, the fuel can be refined to be used by vehicles.